Breast Plate Detector - Mammo 1012P

1. Mammo 1012P is a new generation fixed 10 × 12 inch breast flat panel detector. Using CMOS semiconductor, configuration 50 μ M pixel size. Mammo 1012P is designed specifically for full field digital breast machine (FFDM) and digital breast tomography (DBT) applications.
2. Product Features
Designed specifically for FFDM and DBT applications
10 Gigabit Network Data Transmission
Multi range gain, sensitivity adjustable at will
Small artifacts, no more than 0.5% in the first frame
Extremely low dose, high signal-to-noise ratio, clear and sharp images, strong contrast, capable of observing ultra fine lesions and small calcification points
Fast image acquisition frame rate of 8fps
Higher signal-to-noise ratio and finer images
3. Technical parameters
Mammo 1012P
Detector type: amorphous silicon trigger mode external trigger/soft trigger/Prep
Scintillator type cesium iodide data interface 10 Gigabit Ethernet
Effective imaging area (inch) 10 ×  12 Dimensions (mm3) 315 ×  three hundred ×  twenty-three
Pixel matrix 4681 ×  5905 Weight (kg) ≤ 2
Pixel size（ μ m) 50 power consumption (W) ≤ 25
Spatial resolution (lp/mm) 10 Operating temperature (℃) 10~40
Maximum frame rate (fps) 8 Storage temperature (℃) -10~55
AD conversion digit (bit) 16 Operating humidity (% RH) (no condensation) 10~90
Dynamic range (dB) ＞ 73 Storage humidity (% RH) (no condensation) 10~95
Chest wall distance (mm) ≤ 3
*This document cannot be considered as a contract, and the specific parameter information is subject to the data provided by our company's sales personnel.
The parameters in the specification table are subject to change without prior notice.

Other related products

Other related products
1.Mammo 1012F
ten × 12 inch breast flat panel detector
2.Mammo 1012X
ten × 12 inch breast flat panel detector
3.Mammo 1012C
ten × 12 inch breast flat panel detector